Hunter / Skinner Blank – Blade 2-1/2″

Specs
-Made of 440C steel
-6″ over all length.
-Blade 2 1/2″.
-Satin polished and sharpened.
-3mm Thick.
-2 – 1/8″ Pinholes.
-RC Hardness 57-59

It’s sharp, perfect for the hand with finger hole for control, thumb grove and a serrated edge on top for cutting sinew.
NOTE: These knife blanks are already heat treated and hardened. All you need to do is add a handle and maybe a sheath. We suggest adding a pair of g10 scales in 3/16″ or 1/4″ thick material for the handle. You could also add some handsome wood scales from our extensive assortment, or even from your own stock.
440C is possibly the most popular knife steel in use today. It takes and holds a good edge. It has good corrosion resistance and is tough enough the edge won’t chip out. 440C offers a good performing steel at a good price. Finally, it can easily sharpened. Don’t confuse 440C with lower quality 440A you find on low end knives. 440C is a quality steel that has a good balance of edge holding, toughness and corrosion resistance that has stood the test of time
Length: 6″
Width:2 1/2″
Height 1/8″
Weight 8 ounces